Need more information?
CONTACT US
CONTACT US
Lubrication System
SINGLE LINE WITH FLUID GREASE
The single line system with fluid grease is suitable for the lubrication of small and medium-sized circuits. Fluid greases classes 00 or 000 can be used.
It operates in intermittent pressure / relief cycles guaranteeing an exact dosage in each cycle and can supply a volume of between 0.01 to 0.3 cm3 per lubrication point.
The working pressure of these installations is 40 bar, and they can be easily extended or modified if more or less lubrication points are required.
Depending on the pumping unit used, we can have a totally autonomous unit (with a control and monitoring system) or, alternatively, a unit connected to the automaton of your machine working at the rate set by the machine operator.
The pumping units can be equipped with accessories to monitor their correct operation: pressure gauge, pressure switch, level switch, push button for intermediate lubrication...
Depending on the expected oil consumption, tanks of greater or lower capacity can be chosen. The standard options are 2-3-4-6 litres in plastic material: nylon (opaque) or polyester (transparent).
Applications
Wherever a periodic supply of small quantities of fluid grease is required without subsequent oil recovery, especially in machine tools, packaging, printing, textile and in general any sector related to small or medium sized machine building.
Pump units
LUBRICATION UNITS
In addition to the basic components (pump motor unit with pressure and relief valves), the rest of the accessories necessary to centralise all the control and monitoring functions of the lubrication circuit can be grouped together in the same unit: timer, pressure gauge, pressure switch, level switch, etc.
GE41 electric lubrication unit
Pump flow: 0,2 l/min
Voltages: 24Vdc-115V-230V-230/400V
Tanks: 3 and 6 litres capacity in plastic.
Optional components: control and monitoring device, pressure gauge, pressure switch, level switch, push button for intermediate lubrications
GE75 electric lubrication unit
Compact model with 2 and 3 litres capacity plastic tanks
Pump flow: 0,1 and 0,2 l/min
Voltages: 24Vdc-115V-230V
Optional components: control and monitoring device, pressure gauge, pressure switch, level switch, push button for intermediate lubrications
LUBRICATION GROUPS
Basic equipment with the essential components for supplying the lubrication circuit: motor-pump unit and the valves necessary for managing the pressure and relief cycles of the circuit.
GE51 electric lubrication group
Pump flow: 0,1 y 0,2 l/min
Voltages: 24Vdc-230/400V
Tanks: 2-3-4-6 litres capacity in plastic
Optional component: level switch, pressure gauge, pressure switch, connectors
GE56 electric lubrication group
Pump flow: 0,2 l/min
Voltages: 230/400V
Tanks: 3-4-6 litres capacity in plastic
Optional components: level switch, pressure gauge, pressure switch, connectors
CUSTOM MADE LUBRICATION EQUIPMENTS
We design and manufacture customised units: complete systems mounted on panels or supports, accessories specified by the customer, tanks with special dimensions...
Example of a lubrication unit with electrical components (motor, level switch, pressure switch) in accordance with UL standards.
Volumetric dosing units
DE02-DE07-VE12-VE17 DIRECT ACTING VOLUMETRIC DISTRIBUTORS
The lubricant is supplied to the point as soon as the pump generates pressure. The outlet pressure from the distributor is equal to the maximum admissible pressure of the pump's limiting valve.
DE02-DE07-VE12-VE17
They are used in circuits where immediate lubricant supply is required. The connection to the lubrication point is usually made by means of a Ø4 pipe.
Bodies with 1-2-3-5 outlets
Bodies can be combined to obtain blocks with a greater number of outlets
Dosing rate: 0,01-0,03-0,06-0,10-0,20-0,30 cm3/cycle
Outlet connection via M8x1 thread or quick fitting
DE03 DIRECT ACTING VOLUMETRIC DOSING UNITS
With the same type of operation as the DE02-DE07-VE12-VE17 models. The only difference is that, instead of being connected remotely via a pipe, these dosing units are mounted directly on the lubrication point
DE03
1-outlet bodies
Threads: M8x1 - M10x1 - G1/8 for mounting directly at the lubrication point
Dosing rate: 0,03-0,06-0,10 cm3/cycle
Fittings and pipes
955-956-957
Fittings and piping for the connection between the pump unit and the dosing units, and these with the lubrication points.